PAX 2023

 Hello all!

I'm back from PAX and dreading going back to the real world :). The convention was back to full capacity (and then some) for the first time since COVID. This put a strain on some of the events, but as with every board game convention I have attended, the attendees are all super well-behaved. This is what you get when you build a gathering around people that have chosen a hobby which relies heavily on rule following.

This was the first convention for my oldest child and they had a blast! We left at 3am and filled the 8-hr drive there with D&D podcasts and chatting, getting settled into our hotel room about noon. Two friends met us there and we snaked through the aisles and admired all the wares, ending up on the game library end of the hall and claiming a table. From there it was game after game after game. We played some co-op and some 'take that' games, mixing in a light card game or a snack break to keep mental and physical energy up. A quick walk across the street to the brewery for dinner and then we were back to the table, where we stayed until they kicked us out at midnight.

We started day two with cheese boats from The Marketplace. I had never experienced this dish before, but it's a Georgian dish and it was a wonderful, buttery start to the day.

We decided to paint miniatures as our first stop of the day. This involved more waiting in line than actual painting, but we made the most of it getting to know our line neighbors and joking around with each other. I wasn't a fan of the paints we used (speed paints (aka contrast paints)), but now I know to stick with my acrylics and oils! I got it to mostly turn out the way I wanted in my allotted time.

From there, I had to run back to the room to get the Tak supplies and set up for the tournament. We had a great turnout this year - selling out in 5 minutes!!! Next year we will explore adding more events to this growing convention. 

The tournament was Swiss format and everyone got 4 rounds in before our time slot expired. Everyone walked away with something (besides some great games of Tak), including copies of my Level I book, USTA coins, Playtak.com stickers, and the PAX medal. 

After the tournament, I booked it to the hotel room to put away my things and we were back out onto the streets of Philly to walk to our dinner reservations. We had Little Nona's and it was the best meal of the trip. Little Nona's is a back-alley Italian joint. And I literally mean we ate in their extension which is an alley with a roof on it. The food and service were spectacular.

From there it was back to the convention center and back to board games! We had a couple hours to play games from the library and filled them with a replay of one of the games from Friday as well as some Princess Bride themed games and the first few rounds of a Viking-themed exploration game. We had to cut that one short so we could get to our escape room appointment...

...which we solved! Barely beating the buzzer (3 minutes left on the clock), we solved the Game of Stones themed room. This was also my oldest child's first escape room, so I'm really bringing them into the fold of board game (and adjacent) nerd-dom.

It was too late to go back to the hall after that, so we went to the room and played card games until our eyes crossed.

Sunday is always the worst day because it means leaving, but we made the most of our few hours there. Breakfast at Schmear It and then a run through the expo hall to pick up the things on our list. Then some sad hugs goodbye to our friends and a long car ride home, where my oldest refused to nap...right up until they fell asleep :)

Yesterday was my recovery day, which basically means laundry and house chores and worrying about what all I missed at work. But, I did find time to play my Tak Open match against Abyss and do some crafting. Nothing I can share at the moment since I'm making Christmas gifts, but I will post after the holidays.

I did install my quick swap kit from Snapmaker so that I can go from laser to CNC to 3D printing in a couple minutes instead of 15 minutes of removing and reinstalling tiny screws. I look forward to getting my shop fully operational next year, once I have fulfilled my non-Tak promises.

If you are interested in getting your project on the waiting list, please see my site and fill out the contact form. https://www.beautiful-upgrades.com/

That's all for this episode. Stay tuned and thanks for stopping by!

My Creative Process

I published this in the summer Capstone Quarterly this year and didn't ever publish it here. I'm sending it through now (12/5/23): 

Hello all!

I have been in the garage working hard to get my GenCon prizes done in addition to finishing out the administrative work of the latest USTA Beginner Tournament and putting the final touches on my intermediate level strategy guide Mastering Tak: Level II - the road to greatness. With all this creative output, I have been doing some self-analysis and pondering over my creative process in general. In this post I would like to walk through how I go about a project.

Most of my projects are chosen instead of assigned. The USTA may need a prize for an upcoming event, but that can take the form of a capstone, a board, a full set, a trinket, a trophy, or anything in between. Other projects are begun because an idea struck me and I am curious to see if it can live outside my brain, where physics and other annoying things dwell. And some projects are started so that I can work on a particular skill that I am interested in or have not used in a while and want to ensure that it does not atrophy.

The creative freedom allowed by this relationship with my projects can be paralyzing. If I have the ability to work on anything, that can lead to working on nothing. Philosophical problems like Buridan's Donkey examine this problem. In this hypothetical situation, a hungry donkey is placed between two identical piles of hay and starves because it cannot decide which to go to since they are identical in every respect. The modern crafting world actually compounds this problem of choice with the availability of software and hardware that can bring to life almost anything.

So, I combat with a two-fold approach - constraints and "crappy drafts".

Paradoxically, constraints enable creativity. By assigning or discovering limits to a design, you give yourself both direction and challenge, which turbocharge the creative process. Imagine the difference in productivity between asking you to "build me a doo-hickey" and "you have 3 weeks to build me a wooden top that looks like a Viking shield". Both are projects, but I guarantee that the more highly constrained version will produce better results. Therefore, I highly recommend making a list of constraints after envisioning a project. After you have this list, you can determine which are "hard" constraints and which are "soft". A hard constraint cannot be worked around. An example would be a firm deadline, the form of a project (i.e. if you are making a Tak set, it must meet the requirements of a Tak set), or a fundamental restriction like "you can only use 3D printing to form your parts". Soft constraints are everything else - materials, tools, budget, current skills, etc. The soft constraints can be adjusted. I can learn new skills, increase the budget (if I have it and the project warrants it), and acquire more tools. Additionally, I can look at the basics of the project and stretch some of the parameters (i.e. Tak requires differentiation of walls and flats; what if we do this by inscribing a 'W' on one side instead of physically standing it up?). After examining the constraints, I get to the second part of my anti-paralysis.

"Crappy drafts" are the cold water approach to swimming. Don't be like the kid that slowly walks into the water until it reaches their thighs and then runs out screaming. You have to just jump in and get wet first. Your first draft should be crappy. Don't spend all day adding embellishments to your flats before seeing if the general shape feels good to play with. I generally like to sketch some things on physical paper, then roll those ideas around my head, then prototype them. Design software can help reduce material wastage, but there is no substitute for a physical prototype. Therefore, I like to get one of these as quickly as possible, so I can discover pros and cons of an idea as quickly as possible and adjust the direction of the project early. Luckily, hobby-level 3D printers exist. 

After I have crappy draft that falls in line with my constraints, the rest of the project is just a matter of refinement and "Ah-ha!" moments. I live for the Ah-ha! They are why I craft. Some of these moments put the current project onto a new track. Other times they inspire future projects. But they are always an enjoyable rush.

The last advice I want to give in this article is to learn your tendencies. I am impatient when it comes to getting my ideas out of my head and into the world. This can lead to rushing steps that shouldn't be rushed. This is exacerbated by the fact that I have a limited amount of "hobby time" and like to accomplish as much as possible during those short spans. I have learned to deal with this by always having multiple works in progress. This allows me to not rush x project because I can go work on y project. For example, last weekend I was in the garage with a project running on the 3D printer. While I was babysitting the first layer of that, I was sanding pieces from another project. Then, when the first layer finished, I put a coat of primer on another set of pieces and went inside to do some final editing on the computer. This allowed me to let the 3D printer work and the primer to cure without me hovering over everything getting frustrated at how long it was taking.

I hope you enjoyed a peek behind the scenes. Feel free to ask me questions!

Big News (and more big news I forgot to post earlier (oops))

 Hello all!

I've been so caught up with life, work, and projects that I've already promised people that I forgot to update you on Mastering Tak: Level II. It's out and available! (Now also in Kindle format, though, just like Level I, I cannot guarantee readability on all devices).

For interested parties in the US, you can get it here. If you live outside the US, try going to your local Amazon site. For example, amazon.de is the German site. Since the book is printed on demand, you can potentially save a lot on shipping and also get it much sooner than buying it from the main Amazon.com site.

In related, but newer news, I have started on some opening supplements that will explore the main lines of each of the three main openings currently popular in Tak: The Hug, The Knight, and Center Claim. I plan to publish in that order, starting with The Hug, due out in Spring of next year.

Unrelated to writing, I have FINALLY been granted a craftsman license for Tak!!!

What this means is that I am approved to sell my capstones, boards, and full sets at cottage industry quantities. I have delayed announcing this (and honestly should continue to delay) because this unfortunately comes at a time when I am in the middle of a bathroom remodel for a coworker, handmade Christmas gift production for friends and family, the incoming holidays, a work trip, and PAX Unplugged.

That is not to say that I am not completely thrilled to get the license. It is just that my shop will not be tooled up for Tak until the end of the year or early next. I already have a few commissions once that happens, and if you would like to get your name on the books for one of my offerings, or discuss a completely new idea, please drop me a line on my website via the contact form.

Thanks everyone!

General Update - 1st Half of 2023

Hello all!

It's been a while since I used this medium to communicate with the community (I'm primarily haunting the Discord these days, with a smattering of Instagram (@rabbitboy84) crafting updates). 

I thought that this halfway point of the year would be a good time to dust off my keyboard and get to it. Not that my keyboard is actually dusty since I have been pecking away at it all year while working on Mastering Tak Level II, my intermediate guide. I am in the proofing stages now -- writing is done, cover art is finalized, and copyrighting is in progress. I will update the community when it goes live in another month or so.

Quite the size difference between I and II

That's one rather large iron that I have in the fire, but I've still been trying to get smaller projects/objectives accomplished along the way. Besides the general US Tak Association administrative duties and Beginner Tournaments, I am getting ready to represent Tak at GenCon in August. We are running 12 events this year and adapting our format slightly based on feedback and observations from years past. I highly encourage anyone reading this to attend this convention -- GenCon is an incredible experience!

For GenCon prizes, in addition to our USTA coins, Playtak stickers, and commercial sets provided by Greater than Games, I have been out in the garage making some capstones. 

Our new playtak.com logo on a swag sticker.

This challenge coin was delayed and missed GenCon last year, but will be a hefty piece of swag for tournament participants this year.

I got a lathe for Christmas and have finally gotten it out of the box and spinning. Turning wood and wood/resin is surprisingly relaxing -- I only have three turnings under my belt at this point, but I can see this becoming an important part of my future creations.

Maple and Purpleheart in the classic style.

"Water" - carved and turned olivewood, oil paint, and resin.

Although the lathe is awesome, it just cannot match some of the other methods that I use. Here are the non-turned capstones for GenCon:

The companion to the last shown capstone ("Water"), this is "Fire"- carved ebony with oil paint and resin.

And here they are together, steaming up the board.

"Cat and Mouse" - carved soapstone. These need final details and polish, but they are almost there.

These were to be a set called "Epic Fail" which was an attempt to capture the point of failure of a steel cable and a fuse...but the resin failed to cure. So they lived up to their name :)
I may or may not have the time to redo these in time for GenCon. If I do not get them in time, I will probably remake for a future tournament of some sort later this year.

Those are what I have so far for GenCon but if we walk back in time to earlier this year, I created these for the Intermediate Open Tournament:

"Sci-fi" - suspended objects in resin. These are some of my favorite resin ones to date.
 

As you rotate them, the scenes and colors change due to the layout of the facets and layers.

"Kilvin's Lamps #2" - copper, paint, glass, and steampunk bits.

And they light up!

That's been my Tak year so far on the crafting side of things. Stay tuned for updates. I'm not the most consistent, but hopefully what I do put out is worth taking a minute to browse :)

Thanks for reading, and happy Takking!

If you have any questions, feel free to find me on the Discord or Reddit (rabbitboy84) or shoot me an email (bill.leighton1@gmail.com).